Sunday, April 20, 2014

Hands2Help - Time to Check In!!

Hi, all!!

Hello, all you wonderful H2Hers!  I've heard from so many of you who have been working so diligently on your quilts - it makes me smile to think of all the good that you are doing, and all the quilty hugs that will be shared through this year's Challenge!  

So today there is a linky party for you to link up and show your progress.  Maybe that's just a pile of fabric, or maybe even just a state of confusion about what you should do.  For some of you, it may even be finished quilts!  Wherever you are, link up and share - then go visit your fellow H2Hers and cheer them on!  

And if you're stuck without an idea of what to make, I'm going to share a simple quilt tutorial that can be made in several sizes.  This was posted on my blog back in July of last year…






This tutorial is for a great quilt design by Deb at A Simple Life Quilts.  She calls it Noodle Recipe because her version uses 2.5" strips, which were known as noodles at the time she came up with the design, many years ago.  She graciously allowed me to post a tutorial for her quilt design on my blog - thanks, Deb!

I've made some size adjustments, so you can use this design to make a baby or toddler quilt (40" square), a child's quilt (50" square), or an adult quilt (60" square).  A nice general all-purpose design!  All three sizes are constructed the same way, with the same number of blocks.  The only differences are the size of the blocks, and the borders on the adult size quilt.


And the best part?  I made this flimsy in less than three hours, including choosing fabric and cutting it out!  So without further ado, here's the tutorial....



Noodle Quilt
Designed by Deb@asimplelifequilts


Fabric Requirements:

NOTE: The fabric requirements listed below are “best case scenario” requirements in some cases.  If your fabric is not cut or folded straight, you may need more fabric than is listed.  I have put the actual number of inches of selvage to selvage fabric required for each cut in parentheses following the listing in case you are working from stash fabrics.

Baby quilt:
1/2 yard of a print fabric (print #1) (for pieced blocks) (15”)
1/2 yard of a solid fabric (15”)
3/4 yard of a print fabric (print #2) (for large blocks) (25.5”)

Child’s quilt:
3/4 yard of a print fabric (print #1) for pieced blocks) (24”)
3/4 yard of a solid fabric (24”)
1 yard of a print fabric (print #2) (for large blocks)* (31.5”)
   *if the fabric doesn’t have 42” of usable fabric (WOF minus 
   selvages) you will need 1 1/4 yards. (42”)

Adult’s quilt:

Same fabric requirements as the child’s quilt, plus border fabric as listed below:

For a single border:
1 yard of a print fabric (print #3) (33”)

OR

For a double border:
1/4 yard of a solid fabric (solid #2) (9”)
3/4 yard of a print fabric (print #1, #2, or #3) (23”)

NOTE:  After you cut your WOF strips, remove the selvage edges.

Cutting directions for baby quilt:

Print #1 - cut six 2.5” by WOF strips
Solid -      cut six 2.5” by WOF strips

After you have made and measured your pinwheel blocks:

Print #2 - cut twelve 8.5” squares (or whatever size your pinwheel
                blocks came out)

Cutting directions for blocks for child’s or adult’s quilt:

Print #1 - cut eight 3.0” by WOF strips
Solid -      cut eight 3.0” x WOF strips

After you have made and measured your pinwheel blocks:

Print #2 - cut twelve 10.5” squares (or whatever size your pinwheel  
                blocks came out)

Cutting directions for borders for adult’s quilt:

Single border:

Print #3 - cut six 5.5” x WOF strips

Double border:

Solid - cut six 1.5” x WOF strips
Print #1, #2, or #3 - cut six 4.5 x WOF strips

Sewing Directions:

IMPORTANT NOTE:  All seams need to be sewn with an accurate 1/4” seam.  If you use a larger seam, the blocks will not come out the needed size and your quilt will be smaller.

Take one print strip and one solid strip and sew, using a 1/4” seam, down the length of the two strips.  You will now have one piece that is print on one side and solid on the other.  Repeat with all the print and solid strips.  Press the seams towards the print piece.

                          

Now you will need to measure your sewn strips.  Ideally, for the baby quilt, they should be 4.5” wide; for the child or adult quilt, they should be 5.5” wide.  You will now cross-cut the strips to create square blocks, using the measurement of your strip.  

                            


Baby quilt blocks should ideally be 4.5” square, adult quilt blocks should be 5.5” square.  The block will be comprised of one print rectangle and one solid rectangle.  You will need 52 of these blocks to make the larger pinwheel blocks in the quilt.

                 

Divide these blocks into 4 stacks of thirteen, and lay the four stacks out in the pinwheel pattern.  You can now chain piece the blocks together by taking two blocks from the top two stacks, then two blocks from the bottom two stacks, until all the small blocks are gone.  

                   

                   



Press seams towards the long print piece in each pair.  Cut the connecting thread between each pair of block sets - this will give you thirteen sets of block sets that are still connected where the last seam will go.  Sew the final seam.  

 

When you go to press that seam, you can open the seam allowances at the center of the seam, where the four corners meet, so that you can press half the seam one direction and half in the other direction.  This will allow for the seam allowance to be undetectable under a lighter solid.  (It also gives a cool little pinwheel effect on the back of your block!)


When all thirteen of your pinwheel blocks are finished, measure several of them to see what size they turned out.  For the baby quilt, they should measure 8.5”; for the child or adult quilt, they should measure 10.5”.  Whatever they measure, you should cut your large print squares to that measurement. You will need twelve large print squares.

Lay the squares out in a checkerboard pattern, five rows by five rows, with pinwheel blocks in each corner.  Join the blocks in each row, then join the rows together.  If you are making a baby or child’s quilt, you can now quilt as desired and bind!


If you are making an adult quilt, you should now fold your top in half, right side to left side, and measure ALONG THE FOLD to find out the measurement for your side borders.  (Measuring along the fold will help keep your quilt square, and will avoid “waving” on the border.)  Sew three WOF strips together (remember to cut off the selvages first!) and from that long strip, cut two pieces to the measurement you just made.  Attach to the right and left sides of the quilt.  

Now fold your quilt in half, top to bottom, and measure ALONG THE FOLD to find out the measurement for your top and bottom borders.  Sew three WOF strips together and from that long strip, cut two pieces to that measurement.  Attach to the top and bottom of the quilt.  

If you are making two borders, repeat the above process.

Congratulations!  You have finished your quilt top!

*&*&*&*&*&*&*

I hope you enjoy this tutorial!  If you would like a printable copy of it, please leave a comment letting me know and I'll send you the pdf version!  (Be sure you leave an email address, too, if you are a no-reply blogger - I'd hate to miss sending you a copy!  I respond to all comments, so if you don't hear back from me, you're probably a no-reply blogger.)


And remember - if you're just now finding out about the Hands2Help Charity Quilt Challenge, there's still time to join in the fun!  Just leave me a comment letting me know you want to participate and I'll send you more info.

Now it's time to link up.  You can link up a new blogpost, an older blogpost, or link to a picture on the Flickr group. I can't wait to see what you have been working on!  

Hugs!

Sarah

PS Just to be totally up front, I haven't even begun to think about making my H2H quilt!  I'm a little bit behind..  ;-)





8 comments:

  1. I would love a PDF of the quilt. This would be a great quick quilt. I hope you have a Happy Easter.

    ReplyDelete
  2. Thanks for all you do for others. I make quilts for our guild and other organizations for kids. Would love a PDF to use and give to others who do the same. Thanks again

    ReplyDelete
  3. I would love to have a PDF for this quilt. It looks like it would fit right in with the charity quilts that we make. Thanks for the pattern. Hope you enjoy Padukah.

    ReplyDelete
  4. I haven't started my quilt yet and after seeing this tutorial, I think I would like to use it. Please send me a PDF of this tutorial. Thank you.

    ReplyDelete
  5. Cute quilt! Thanks for the tutorial!

    ReplyDelete
  6. Yes, please send me the pdf file of this tutorial. Thank you.

    ReplyDelete
  7. Wish I could have added a quilt this year. Life has been WAY to FULL these days! Maybe next year. Great simple block info.

    ReplyDelete
  8. Sarah, I have been MIA from blogging for a bit. I would love for you to send me some info.

    ReplyDelete

Comments make me smile!! If you want a PDF of a pattern, PLEASE leave your email address in your comment, or email me directly at salliesue57 (at) gmail (dot) com!